Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Prince George's County · Maryland

ChimneySaver Waterproofing in Temple Hills

Fireplaces in Temple Hills earn their keep on the coldest weeks of the year — and they ask for one honest inspection a year in return. For Temple Hills homeowners, chimneySaver Waterproofing runs on our regular Prince George's County route — Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. The housing here — brick colonials, split-levels and garden communities — shapes what our crews check first and what they carry on the truck.

ChimneySaver is the water repellent the chimney industry reaches for first: a siloxane-based, vapor-permeable treatment made specifically for masonry chimneys — not adapted from concrete sealers. We are Maryland applicators for both the solvent- and water-based ChimneySaver lines.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20748
  • 24/7 Emergency
ChimneySaver Waterproofing in Temple Hills, MD — Stone farmhouse chimney protected with ChimneySaver waterproofing in Maryland
ChimneySaver WaterproofingNow booking in Temple Hills · Prince George's County

About ChimneySaver Waterproofing in Temple Hills

ChimneySaver penetrates the surface and lines the pores of the brick, so rain beads off while interior moisture vapor escapes freely — the wall stays dry without being sealed shut. It is the correct finish after repointing, crown work or a rebuild, and the standing defense for sound chimneys facing their next decade of Maryland winters. The manufacturer backs it for 10 years.

What's Included

  • Genuine ChimneySaver product, chimney-specific formula
  • 100% vapor-permeable — the wall keeps breathing
  • 10-year manufacturer warranty
  • Invisible finish, no color or sheen change
  • Applied to refusal after surface preparation

Temple Hills at a Glance

County: Prince George's County

State: Maryland

ZIPs served: 20748

Distance: about 16 miles from our Beltsville headquarters

Homes: brick colonials, split-levels and garden communities

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

A few details here and dispatch calls back to confirm your slot. Rather talk it through? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our ChimneySaver Waterproofing Process in Temple Hills

1

Sound-wall check

Mortar and brick are verified ready — repairs come first if needed.

2

Prep & mask

Roofing, siding and plantings around the stack are protected.

3

Flood application

ChimneySaver is applied in flood coats until the masonry refuses more.

4

Warranty

You receive the product and warranty documentation for your records.

Local Chimney Notes

The Temple Hills pattern we see most: Heavy burners glaze flues faster

Plenty of Temple Hills households burn several nights a week once the cold sets in, and steady burning lays down creosote faster than the once-a-season fire people picture. By the second or third season that layer can glaze — the hard, shiny stage that brushes alone cannot fully remove and the stage most likely to ignite. Our Prince George's County sweeps read the deposit before choosing tools, and the camera scan afterwards shows exactly what came off the flue walls. Homeowners see the same footage we do, on the spot, before any quote is written.

And because this is all we do, the truck that rolls into Temple Hills carries chimney tools, chimney parts and chimney answers — nothing borrowed from another trade.

FAQ

ChimneySaver Waterproofing Questions in Temple Hills

How is ChimneySaver different from other repellents?
It was formulated for chimneys: vapor-permeable, non-film-forming, and tested on masonry that cycles hot and cold — unlike concrete sealers resold for brick.
Can it go over old sealer?
Film-forming coatings must come off first; ChimneySaver needs bare, absorbent masonry to penetrate. We test the surface during the estimate.
How fast can a crew reach Temple Hills for chimneySaver Waterproofing?
Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. Regular appointments are batched into Prince George's County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
How much does a chimney sweep cost in Temple Hills?
It depends on the flue and its condition, so we quote one exact price for your Temple Hills home before any work begins — never an estimate that grows on the ladder. Our current seasonal offer (a full sweep with inspection) is listed on the deal page; everything beyond it is quoted in writing from the inspection findings.

ChimneySaver Waterproofing in Nearby Communities

Route days in Temple Hills rarely end at the town line: the same truck usually continues to Camp Springs (ZIP 20748), Suitland and Hillcrest before heading back to Beltsville — so chimneySaver Waterproofing in Temple Hills batches with the rest of the Prince George's County run, and same-week appointments stay possible here even in October.

More Chimney Services in Temple Hills

See the full chimney service in Temple Hills page for this community's own notes, seasons and reviews.

ChimneySaver Waterproofing in Temple Hills — Booked in One Call

Photo-documented work and upfront written estimates, about 16 miles from our Beltsville headquarters. Talk to a chimney specialist today.