Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Prince George's County · Maryland

Chimney Crown Repair & Rebuild in Temple Hills

Fireplaces in Temple Hills earn their keep on the coldest weeks of the year — and they ask for one honest inspection a year in return. For Temple Hills homeowners, chimney Crown Repair & Rebuild runs on our regular Prince George's County route — Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. The housing here — brick colonials, split-levels and garden communities — shapes what our crews check first and what they carry on the truck.

The crown is the chimney's roof — and the first place water gets in. We seal hairline cracks, apply CrownCoat flexible overlays, and rebuild failed crowns in fiber-reinforced concrete with the overhang and drip edge that shed water clear of the brick.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20748
  • 24/7 Emergency
Chimney Crown Repair & Rebuild in Temple Hills, MD — Rebuilt brick chimney with a new concrete crown, repointed mortar and a new metal liner cap
Chimney Crown Repair & RebuildNow booking in Temple Hills · Prince George's County

About Chimney Crown Repair & Rebuild in Temple Hills

Most Maryland crowns were poured flat, thin and flush — a design that cracks in freeze-thaw cycles and funnels water straight into the masonry. A failed crown is behind more spalled brick, rusted dampers and ceiling stains than any other single defect. Our rebuilds are formed with a proper slope, overhang and drip edge, in 4,000+ PSI fiber-reinforced concrete with stainless mesh — built to outlast the mortar below it.

What's Included

  • CrownCoat flexible crown sealant
  • Full concrete crown rebuilds
  • 4,000+ PSI fiber-reinforced concrete
  • Stainless mesh reinforcement
  • Proper overhang, slope and drip edge

Temple Hills at a Glance

County: Prince George's County

State: Maryland

ZIPs served: 20748

Distance: about 16 miles from our Beltsville headquarters

Homes: brick colonials, split-levels and garden communities

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

A few details here and dispatch calls back to confirm your slot. Rather talk it through? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Crown Repair & Rebuild Process in Temple Hills

1

Inspect

The crown is checked for cracks, wash-out and water pooling.

2

Choose the fix

Seal, overlay or rebuild — based on how much sound concrete remains.

3

Build

Failed material is removed; the new crown is formed, poured and finished.

4

Seal the system

Cap and flashing are verified so the whole top of the chimney sheds water.

Local Chimney Notes

The Temple Hills pattern we see most: Tall stacks, tricky draft

Two-storey stacks and exposed rooflines around Temple Hills make draft a local science: wind over the ridge, a flue that ends below the highest roof point, or a house sealed tight by new windows can all push smoke back into the room. We measure the stack against the 3-2-10 rule, check the damper and smoke shelf, and fix the geometry or the cap — not with guesses, but with the cause identified on camera. Every finding is photographed, because 'trust us' is not documentation.

Every visit ends the same way: photos of your flue before and after, findings in plain language, and one exact written price for anything beyond the booked work — no surprises on the ladder.

FAQ

Chimney Crown Repair & Rebuild Questions in Temple Hills

Why does my crown keep cracking?
Thin, flat pours without overhang crack in freeze-thaw cycles and hold water against the brick. A properly formed crown breaks that cycle.
How long does a rebuild take?
Most crown rebuilds are completed in a single visit, weather permitting.
How fast can a crew reach Temple Hills for chimney Crown Repair & Rebuild?
Temple Hills is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. Regular appointments are batched into Prince George's County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
How much does a chimney sweep cost in Temple Hills?
It depends on the flue and its condition, so we quote one exact price for your Temple Hills home before any work begins — never an estimate that grows on the ladder. Our current seasonal offer (a full sweep with inspection) is listed on the deal page; everything beyond it is quoted in writing from the inspection findings.

Chimney Crown Repair & Rebuild in Nearby Communities

Route days in Temple Hills rarely end at the town line: the same truck usually continues to Camp Springs (ZIP 20748), Suitland and Hillcrest before heading back to Beltsville — so chimney Crown Repair & Rebuild in Temple Hills batches with the rest of the Prince George's County run, and same-week appointments stay possible here even in October.

More Chimney Services in Temple Hills

See the full chimney service in Temple Hills page for this community's own notes, seasons and reviews.

Chimney Crown Repair & Rebuild in Temple Hills — Booked in One Call

Photo-documented work and upfront written estimates, about 16 miles from our Beltsville headquarters. Talk to a chimney specialist today.