Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Montgomery County · Maryland

HeatShield Chimney Relining in Martins Additions

Fireplaces in Martins Additions earn their keep on the coldest weeks of the year — and they ask for one honest inspection a year in return. For Martins Additions homeowners, heatShield Chimney Relining runs on our regular Montgomery County route — Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. The housing here — early-1900s colonials and cottages in a historic village enclave — shapes what our crews check first and what they carry on the truck.

Not every failed clay flue needs to be replaced. HeatShield is a ceramic resurfacing system that repairs open mortar joints and resurfaces damaged tile from inside the flue — restoring the smooth, sealed surface a safe flue requires, at a lower cost than a full stainless relining where the tiles themselves are still sound.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20815
  • 24/7 Emergency
HeatShield Chimney Relining in Martins Additions, MD — Flue interior before HeatShield ceramic resurfacing
HeatShield Chimney ReliningNow booking in Martins Additions · Montgomery County

About HeatShield Chimney Relining in Martins Additions

The honest dividing line is the tile. If your flue's tiles are cracked through or displaced, stainless relining is the answer. If the damage is failed mortar joints, surface erosion and gaps between otherwise sound tiles, HeatShield's joint-repair or full resurfacing restores the flue to a single sealed ceramic tube. A camera scan decides which side of the line your chimney is on — and we show you the footage.

What's Included

  • HeatShield joint repair for failed mortar joints
  • Full CeCure resurfacing for eroded tile flues
  • Applied from inside — no demolition
  • Restores a smooth, code-compliant flue surface
  • Camera-verified before and after

Martins Additions at a Glance

County: Montgomery County

State: Maryland

ZIPs served: 20815

Distance: about 11 miles from our Beltsville headquarters

Homes: early-1900s colonials and cottages in a historic village enclave

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our HeatShield Chimney Relining Process in Martins Additions

1

Scan

The flue is camera-inspected to confirm tiles are sound enough to resurface.

2

Prep

Loose material is cleaned from joints and tile surfaces.

3

Apply

HeatShield is applied by foam applicator matched to your flue's shape.

4

Verify

A final scan confirms a continuous, sealed ceramic surface.

Local Chimney Notes

Why Martins Additions chimneys keep us busy: Gas logs still need the flue

Plenty of Martins Additions fireplaces were converted to gas over the years, and the flue above them was simply forgotten. Gas exhaust is cooler and wetter than wood smoke — it condenses inside clay liners, eats mortar from the inside, and carries carbon monoxide that must never find a crack to leak through. Converted systems need inspection like any other, and ventless or vented questions are ones we answer with the appliance manual and a CO meter, not opinions. This is our standard approach: inspect on a schedule, repair on evidence.

The visit is also a chance to ask anything — burning habits, wood storage, damper quirks. Our sweeps would rather teach for five minutes than return for a preventable problem.

FAQ

HeatShield Chimney Relining Questions in Martins Additions

Does it change my flue size?
Minimally — the coating is thin and follows the existing tile, preserving draft characteristics.
HeatShield or stainless — which do I need?
Sound tiles with failed joints: HeatShield. Cracked-through or missing tiles: stainless. The camera scan makes the call, and you see the same footage we do.
How fast can a crew reach Martins Additions for heatShield Chimney Relining?
Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. Regular appointments are batched into Montgomery County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Do you clean dryer vents while you are here?
Yes — dryer vent cleaning rides on the same truck, and Martins Additions customers often pair it with the sweep: same visit, same drop cloths, one invoice. A clogged dryer vent is a fire risk of its own and the lint load in Montgomery County homes is usually worse than owners expect.

HeatShield Chimney Relining in Nearby Communities

Route days in Martins Additions rarely end at the town line: the same truck usually continues to Somerset (ZIP 20815), Friendship Heights and Chevy Chase before heading back to Beltsville — so heatShield Chimney Relining in Martins Additions batches with the rest of the Montgomery County run, and same-week appointments stay possible here even in October.

More Chimney Services in Martins Additions

See the full chimney service in Martins Additions page for this community's own notes, seasons and reviews.

HeatShield Chimney Relining in Martins Additions — Booked in One Call

Photo-documented work and upfront written estimates, about 11 miles from our Beltsville headquarters. Talk to a chimney specialist today.