Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Montgomery County · Maryland

ChimneySaver Waterproofing in Martins Additions

When Martins Additions homeowners light the first fire of the season, they are trusting a flue nobody has looked inside since last winter. For Martins Additions homeowners, chimneySaver Waterproofing runs on our regular Montgomery County route — Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. The housing here — early-1900s colonials and cottages in a historic village enclave — shapes what our crews check first and what they carry on the truck.

ChimneySaver is the water repellent the chimney industry reaches for first: a siloxane-based, vapor-permeable treatment made specifically for masonry chimneys — not adapted from concrete sealers. We are Maryland applicators for both the solvent- and water-based ChimneySaver lines.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20815
  • 24/7 Emergency
ChimneySaver Waterproofing in Martins Additions, MD — Stone farmhouse chimney protected with ChimneySaver waterproofing in Maryland
ChimneySaver WaterproofingNow booking in Martins Additions · Montgomery County

About ChimneySaver Waterproofing in Martins Additions

ChimneySaver penetrates the surface and lines the pores of the brick, so rain beads off while interior moisture vapor escapes freely — the wall stays dry without being sealed shut. It is the correct finish after repointing, crown work or a rebuild, and the standing defense for sound chimneys facing their next decade of Maryland winters. The manufacturer backs it for 10 years.

What's Included

  • Genuine ChimneySaver product, chimney-specific formula
  • 100% vapor-permeable — the wall keeps breathing
  • 10-year manufacturer warranty
  • Invisible finish, no color or sheen change
  • Applied to refusal after surface preparation

Martins Additions at a Glance

County: Montgomery County

State: Maryland

ZIPs served: 20815

Distance: about 11 miles from our Beltsville headquarters

Homes: early-1900s colonials and cottages in a historic village enclave

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our ChimneySaver Waterproofing Process in Martins Additions

1

Sound-wall check

Mortar and brick are verified ready — repairs come first if needed.

2

Prep & mask

Roofing, siding and plantings around the stack are protected.

3

Flood application

ChimneySaver is applied in flood coats until the masonry refuses more.

4

Warranty

You receive the product and warranty documentation for your records.

Local Chimney Notes

Why Martins Additions chimneys keep us busy: Prefab fireplaces are aging on schedule

A large share of Martins Additions homes heat with factory-built (prefab) fireplaces installed when the neighborhood went up. Those systems were engineered with service lives: refractory panels crack and thin, dampers warp, and chase covers rust through at the seams. We measure panels against the replacement threshold, photograph everything, and tell you plainly whether the unit needs panels, parts — or honest retirement. Every finding is photographed, because 'trust us' is not documentation.

We are a chimney-only company — sweeps, scans, masonry and liners are the whole business, and it shows in the questions we ask and the photos we bring back down the ladder.

FAQ

ChimneySaver Waterproofing Questions in Martins Additions

Is it safe for historic brick?
Yes — it is the standard recommendation for soft and historic masonry precisely because it does not trap moisture.
When can it be applied?
On dry masonry in above-freezing weather — most of the Maryland year outside deep winter.
How fast can a crew reach Martins Additions for chimneySaver Waterproofing?
Martins Additions is about 11 miles from our Beltsville headquarters — typically a 30-minute drive in normal traffic. Regular appointments are batched into Montgomery County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Can you waterproof my chimney without changing how it looks?
Yes. We use vapor-permeable ChimneySaver waterproofing, which keeps liquid water out while letting the brick breathe — and it is invisible once cured, unlike film-forming sealers that blister and trap moisture. It is applied after any needed repointing, on sound brick across Montgomery County.

ChimneySaver Waterproofing in Nearby Communities

Route days in Martins Additions rarely end at the town line: the same truck usually continues to Somerset (ZIP 20815), Friendship Heights and Chevy Chase before heading back to Beltsville — so chimneySaver Waterproofing in Martins Additions batches with the rest of the Montgomery County run, and same-week appointments stay possible here even in October.

More Chimney Services in Martins Additions

See the full chimney service in Martins Additions page for this community's own notes, seasons and reviews.

ChimneySaver Waterproofing in Martins Additions — Booked in One Call

Photo-documented work and upfront written estimates, about 11 miles from our Beltsville headquarters. Talk to a chimney specialist today.