Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Prince George's County · Maryland

ChimneySaver Waterproofing in Fort Washington

From the outside, a Fort Washington chimney is brick and a cap. Inside, it is a heat-and-exhaust system that ages with every fire — and it ages fastest when nobody checks it. For Fort Washington homeowners, chimneySaver Waterproofing runs on our regular Prince George's County route — Fort Washington is about 21 miles from our Beltsville headquarters — typically a 50-minute drive in normal traffic. The housing here — established subdivisions of brick and frame homes — shapes what our crews check first and what they carry on the truck.

ChimneySaver is the water repellent the chimney industry reaches for first: a siloxane-based, vapor-permeable treatment made specifically for masonry chimneys — not adapted from concrete sealers. We are Maryland applicators for both the solvent- and water-based ChimneySaver lines.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20744
  • 24/7 Emergency
ChimneySaver Waterproofing in Fort Washington, MD — Stone farmhouse chimney protected with ChimneySaver waterproofing in Maryland
ChimneySaver WaterproofingNow booking in Fort Washington · Prince George's County

About ChimneySaver Waterproofing in Fort Washington

ChimneySaver penetrates the surface and lines the pores of the brick, so rain beads off while interior moisture vapor escapes freely — the wall stays dry without being sealed shut. It is the correct finish after repointing, crown work or a rebuild, and the standing defense for sound chimneys facing their next decade of Maryland winters. The manufacturer backs it for 10 years.

What's Included

  • Genuine ChimneySaver product, chimney-specific formula
  • 100% vapor-permeable — the wall keeps breathing
  • 10-year manufacturer warranty
  • Invisible finish, no color or sheen change
  • Applied to refusal after surface preparation

Fort Washington at a Glance

County: Prince George's County

State: Maryland

ZIPs served: 20744

Distance: about 21 miles from our Beltsville headquarters

Homes: established subdivisions of brick and frame homes

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Tell us about your chimney — we confirm every request by phone. Prefer to talk? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our ChimneySaver Waterproofing Process in Fort Washington

1

Sound-wall check

Mortar and brick are verified ready — repairs come first if needed.

2

Prep & mask

Roofing, siding and plantings around the stack are protected.

3

Flood application

ChimneySaver is applied in flood coats until the masonry refuses more.

4

Warranty

You receive the product and warranty documentation for your records.

Local Chimney Notes

The Fort Washington pattern we see most: Gas logs still need the flue

Plenty of Fort Washington fireplaces were converted to gas over the years, and the flue above them was simply forgotten. Gas exhaust is cooler and wetter than wood smoke — it condenses inside clay liners, eats mortar from the inside, and carries carbon monoxide that must never find a crack to leak through. Converted systems need inspection like any other, and ventless or vented questions are ones we answer with the appliance manual and a CO meter, not opinions. Homeowners see the same footage we do, on the spot, before any quote is written.

The visit is also a chance to ask anything — burning habits, wood storage, damper quirks. Our sweeps would rather teach for five minutes than return for a preventable problem.

FAQ

ChimneySaver Waterproofing Questions in Fort Washington

Can it go over old sealer?
Film-forming coatings must come off first; ChimneySaver needs bare, absorbent masonry to penetrate. We test the surface during the estimate.
Is it safe for historic brick?
Yes — it is the standard recommendation for soft and historic masonry precisely because it does not trap moisture.
How fast can a crew reach Fort Washington for chimneySaver Waterproofing?
Fort Washington is about 21 miles from our Beltsville headquarters — typically a 50-minute drive in normal traffic. Regular appointments are batched into Prince George's County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
Will sweeping make a mess in my home?
No. The firebox is sealed with sheeting, the vacuum runs HEPA-filtered for the whole job, and floors are covered before the first brush moves. It is the part of the visit Fort Washington customers comment on most — the system is designed so soot goes into our containment, never into your living room.

ChimneySaver Waterproofing in Nearby Communities

Route days in Fort Washington rarely end at the town line: the same truck usually continues to Friendly (ZIP 20744), Forest Heights and Oxon Hill before heading back to Beltsville — so chimneySaver Waterproofing in Fort Washington batches with the rest of the Prince George's County run, and same-week appointments stay possible here even in October.

More Chimney Services in Fort Washington

See the full chimney service in Fort Washington page for this community's own notes, seasons and reviews.

ChimneySaver Waterproofing in Fort Washington — Booked in One Call

Photo-documented work and upfront written estimates, about 21 miles from our Beltsville headquarters. Talk to a chimney specialist today.