Skip to main content

Chimney Repair in Temple Hills

Chimney sweep, inspection, and repair in Temple Hills — an established Prince George's community of 1960s-70s brick ranchers and Colonials inside the Beltway. Aging mortar crowns, clay tile liners with washed-out joints, and rusted throat dampers are the most common chimney calls here.

ETA: 25-35 min|Temple Hills, MD 20748
Neighborhood in Temple Hills, Maryland

Neighborhoods We Serve in Temple Hills

Hillcrest HeightsMarlow HeightsCamp Springs

Chimney Service in Temple Hills, MD

Temple Hills is an established inside-the-Beltway Prince George's community that grew up in the 1950s, 60s, and 70s as DC's federal workforce moved out into Maryland's first-tier suburbs. The streets around St. Barnabas Road, Branch Avenue, and the Iverson Mall area are lined with sturdy brick ranchers, split-foyer homes, and modest Colonials with full-height masonry chimneys. The community sits within easy reach of Joint Base Andrews, the Branch Avenue Metro station, and the Marlow Heights commercial corridor — a working-class to middle-class neighborhood where homes are passed down across generations and chimneys are usually older than the current owner.

The core chimney issue in Temple Hills is age. Most of the brick stacks we service here are 55-70 years old, with mortar crowns that have crumbled, clay tile liners with washed-out joints, throat dampers rusted into the open position, and decades of unswept creosote buildup in the smoke chamber and flue. We see the same crown failures, parge falls, and missing caps over and over in Hillcrest Heights, Marlow Heights, and along the Camp Springs border. Real estate transactions drive a steady flow of Level 2 inspections; once homeowners see the video flue scan, crown rebuilds and stainless relining become inevitable.

Common Chimney Issues in Temple Hills

Here are the chimney problems we see most often from Temple Hills homeowners.

Crown Failure on 1950s-70s Brick Chimneys

Temple Hills chimneys were built with thin mortar-wash crowns lacking overhang, drip kerf, or reinforcement. After 55-70 winters those crowns have spalled, cracked, and in many cases washed away entirely. Water now flows directly into the chimney chase. We rebuild with 4,000+ PSI fiber-reinforced poured concrete with 2-inch overhang and proper drip detail.

Glazed Creosote from Decades of Cool Burns

Many Temple Hills wood-burning fireplaces and inserts have decades of unswept creosote, much of it now in the dangerous glazed (third-degree) form. Rotary brushes alone cannot remove glaze; we chemically pre-treat with Anti-Creo-Soot and follow with PCR rotary chains to restore safe flue dimensions and prevent chimney fires.

Throat Damper Rust and Air Leakage

The original cast-iron throat dampers in 1950s-70s Temple Hills fireplaces have rusted, warped, and no longer seal. Conditioned HVAC air leaks 24/7 through the gap. We install Lyemance or Lock-Top top-sealing dampers at the crown that pay for themselves in 1-3 winters of HVAC savings.

Smoke Chamber Parge Loss

The parge coat above the firebox in Temple Hills masonry chimneys has cracked and fallen off over decades of thermal cycling. Exposed corbelled brick reduces draft and increases creosote deposition. We restore with Smoktite or cerfractory shields to NFPA 211 standards.

Temple Hills Housing & Chimneys

Temple Hills' housing stock is dominated by brick ranchers, split-foyer homes, and modest Colonials built between 1955 and 1978. Most have full-height single-flue brick chimneys on a gable end serving an open masonry fireplace, plus a small separate flue for the oil or gas furnace. Hillcrest Heights features earlier 1950s ranchers with narrower lots; Marlow Heights contains a mix of 1960s split-foyers and Colonials; the Camp Springs border has slightly newer 1970s homes with larger lots. A smaller pocket of 1980s-90s townhomes along Branch Avenue features zero-clearance pre-fab metal flues. Across all eras, the original chimney crowns, dampers, and caps are well past their service life.

How Maryland Weather Affects Chimneys in Temple Hills

Temple Hills sits in USDA zone 7a with 40-plus annual freeze-thaw cycles. The community's lower elevation along Henson Creek and Suitland Parkway tributaries traps humidity, accelerating efflorescence on shaded brick. Summer dew points routinely exceed 70 degrees, reactivating creosote odors in unused flues. Hurricane-season tropical storm remnants drive wind-driven rain into compromised flashing; ice storms periodically damage caps and shrouds. Because so many Temple Hills chimneys have failed crowns, every rain event causes a small amount of further internal damage.

Recent Chimney Work Near Temple Hills

A selection of recent installations and repairs from our Prince George's County and surrounding Maryland service area.

Custom carriage-style door installation
Custom carriage-style door installation
Modern farmhouse insulated steel door
Modern farmhouse insulated steel door
Contemporary full-view glass-panel door
Contemporary full-view glass-panel door
Premium wood-look lodge-style door
Premium wood-look lodge-style door
After-hours frosted-glass install
After-hours frosted-glass install
Same-day off-track door repair
Same-day off-track door repair

Want this kind of work at your Temple Hills home? Request a free estimate.

Chimney Services Available in Temple Hills, MD

Full chimney sweep & repair and installation service in Temple Hills. Licensed technicians dispatched from our fleet. View our transparent pricing or read our chimney care guides.

Chimney Sweep & Cleaning

Professional industry-standard chimney sweep and creosote removal across Maryland. Brushes, dual HEPA vacuums, drop cloths, and a complimentary video inspection on every clean.

From $189

Chimney Inspection (Levels 1, 2 & 3)

NFPA 211 Level 1, 2, and 3 chimney inspections with high-resolution video flue scans, written reports, and code compliance for real estate transactions, insurance claims, and post-event diagnostics.

From $129

Chimney Cap Installation

Stainless steel, copper, and multi-flue chimney caps with integrated animal guards and spark arrestors. Lifetime warranty on premium caps, professional install on every flue.

From $225

Chimney Crown Repair & Rebuild

Chimney crown sealing, CrownCoat overlays, and full crown rebuilds with proper overhang and drip edge — the single most important repair for stopping chimney water damage at its source.

From $375

Chimney Waterproofing

ChimneySaver vapor-permeable masonry waterproofing — 10-year warranty. Stops freeze-thaw spalling without trapping water in the brick. Never use silicone sealers on a chimney.

From $325

Chimney Relining (Stainless Steel & Cast-in-Place)

UL-listed stainless steel liner systems, HeatShield ceramic relining, and Supaflu cast-in-place liners for wood, gas, and oil. Required by code when tile liners crack, gap, or fail.

From $1,800

Chimney Masonry Repair & Rebuilding

Tuckpointing, brick replacement, partial rebuilds above the roofline, and full rebuilds from the firebox up. expert masons who match historic brick and mortar for landmark homes.

From $450

Chimney Flashing & Leak Repair

Step flashing, counter flashing, ice and water shield, and cricket installs. Root-cause leak diagnosis — not tar patches that fail in two seasons.

From $275

Fireplace Installation & Service

Gas inserts (vented and ventless), wood-burning inserts, pellet stoves, EPA-certified appliances, wood-to-gas conversions, glass door installs, and hearth refresh.

From $599

Damper Repair & Installation

Top-sealing dampers (Lyemance, Lock-Top) save up to $200/year vs throat dampers. Plus throat damper rebuilds, cable replacement, and full replacements when seizure ends the lifespan.

From $175

Commercial Chimney Services

Boiler stacks, restaurant exhaust (Type I hoods, NFPA 96), apartment building flues, dryer-vent systems, and code-violation correction for property managers, restaurateurs, and facility operators.

From $399

HeatShield® Cerfractory Chimney Relining

HeatShield® cerfractory flue sealant — a code-listed alternative to stainless relining that restores cracked clay tile liners from inside the existing flue. Call (855) 424-6217 for a Maryland HeatShield assessment.

From $1,400

ChimneySaver® Waterproofing Application

ChimneySaver® vapor-permeable waterproofing — the chimney industry's standard for stopping water entry through brick faces and mortar joints. Backed by a 10-year manufacturer warranty. Call (855) 424-6217.

From $325

Chimney Insurance Claim Inspection & Repair

Insurance-grade chimney inspection, scope-of-loss documentation, and code-compliant repair coordination for storm, fire, lightning, and impact damage claims in Maryland. Call (855) 424-6217.

From Quote-Based

Chimney Leak Detection & Diagnostic

Chimney leak diagnostic that finds the real entry point — crown, cap, flashing, masonry, or condensation — before any repair is quoted. Call (855) 424-6217 for a Maryland chimney leak diagnostic.

From $229

NFPA 211 Level 1 Chimney Inspection

Annual NFPA 211 Level 1 chimney inspection — the maintenance baseline required for every active chimney in Maryland. Bundled with every sweep. Call (855) 424-6217.

From $129

NFPA 211 Level 2 Chimney Inspection (Real Estate & Post-Event)

NFPA 211 Level 2 chimney inspection with full video flue scan — required for real estate transactions, fuel conversions, and post-event evaluation. Call (855) 424-6217.

From $325

Dryer Vent Cleaning & Inspection

Dryer vent cleaning and inspection — clogged dryer vents cause an estimated 2,900 home fires annually nationwide. Maryland code requires periodic cleaning. Call (855) 424-6217.

From $149

Wood Stove Installation (EPA-Certified)

EPA-certified wood stove installation across Maryland — Vermont Castings, Lopi, Jotul, Quadra-Fire, Hearthstone. Code-compliant venting, hearth construction, and permit coordination. Call (855) 424-6217.

From $1,200

Wood-to-Gas Fireplace Conversion

Wood-to-gas fireplace conversion across Maryland — direct-vent gas inserts, vented gas log sets, and ventless options. Code-compliant liner sizing, gas line connection, and permit coordination. Call (855) 424-6217.

From $3,500

Chimney Animal Removal & Damage Repair

Humane chimney animal removal, nest extraction, flue sanitization, and damage repair — including cap installation to prevent re-entry. Call (855) 424-6217 for Maryland chimney animal service.

From $249

Why Choose Eagle Chimney Service in Temple Hills

Temple Hills is a 25-35 minute drive from our Beltsville HQ via the Beltway and Branch Avenue. We have completed hundreds of crown rebuilds, stainless relines, and glazed-creosote removals in Hillcrest Heights, Marlow Heights, and along the Camp Springs border. Our trucks carry pre-cut HeatShield kits, Lyemance and Lock-Top top-sealing dampers, lifetime stainless caps, and Anti-Creo-Soot — so most calls are resolved in a single visit.

25-35 min Response

Fast dispatch to Temple Hills from our Maryland fleet.

Licensed & Insured

Background-checked technicians with 13+ years of experience.

100% Satisfaction

Upfront pricing, no hidden fees, written warranty on every job.

Temple Hills Chimney Repair — FAQs

Common questions from Temple Hills, MD homeowners.

How fast can you reach Temple Hills for an emergency call?

Temple Hills is 25-35 minutes from our Beltsville HQ via the Beltway and Branch Avenue. We answer 24/7 at (855) 424-6217 and dispatch the closest available experienced technician immediately for chimney fires, active leaks, CO alarms, and trapped animals throughout 20748.

How much does a chimney sweep cost in Temple Hills?

Open wood-burning fireplace sweeps with NFPA 211 Level 1 inspection run $189-$279 in Temple Hills. Wood stove and insert sweeps run $219-$329. Glazed creosote removal is priced separately based on flue length and severity. All quotes are upfront and itemized.

Do you handle real estate transaction inspections in Temple Hills?

Yes. We deliver realtor-ready PDF Level 2 inspection reports with video flue scans, photo documentation, code citations, and repair quotes within 24 hours of the inspection.

Can you remove glazed creosote from my Temple Hills chimney?

Yes. Decades of cool burning produce glazed (third-degree) creosote that rotary brushes cannot remove. We chemically pre-treat with Anti-Creo-Soot and follow with PCR rotary chains to restore safe flue dimensions and prevent chimney fires.

Which Temple Hills neighborhoods do you serve?

We service every Temple Hills neighborhood including Hillcrest Heights, Marlow Heights, the Iverson Mall area, the Branch Avenue corridor, and along the Camp Springs border throughout 20748.

Need Chimney Help in Temple Hills, MD?

Our technicians are ready. Call now for same-day chimney service in Temple Hills or request a free estimate online.