Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Calvert County · Maryland

Chimney Flashing Repair in St. Leonard

Ask a St. Leonard homeowner when their flue was last scanned with a camera and most cannot say. That gap is exactly where chimney fires and carbon-monoxide leaks come from. For St. Leonard homeowners, chimney Flashing Repair runs on our regular Calvert County route — St. Leonard is about 45 miles from our Beltsville headquarters — typically a 100-minute drive in normal traffic. The housing here — waterfront and rural homes near Jefferson Patterson Park — shapes what our crews check first and what they carry on the truck.

When the stain appears on the ceiling beside the chimney, the flashing is the first suspect. We rebuild step flashing and counter-flashing properly — metal woven into the shingles and reglet-set into the mortar — instead of smearing another layer of tar over the failure.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 20685
  • 24/7 Emergency
Chimney Flashing Repair in St. Leonard, MD — Rebuilt brick chimney with new flashing sealed where the chimney meets the roofline
Chimney Flashing RepairNow booking in St. Leonard · Calvert County

About Chimney Flashing Repair in St. Leonard

Roofers patch flashing with caulk and roof cement; both crack within a couple of Maryland summers and the leak returns. Real flashing repair means removing failed material, installing step flashing shingle-by-shingle, and cutting counter-flashing into a mortar joint where it is mechanically locked and sealed. It is the difference between a repair and a ritual.

What's Included

  • Full step-flashing replacement
  • Counter-flashing cut into the mortar joint
  • Cricket and saddle assessment on wide chimneys
  • Water-test verification before we leave
  • Photo documentation of the finished joint

St. Leonard at a Glance

County: Calvert County

State: Maryland

ZIPs served: 20685

Distance: about 45 miles from our Beltsville headquarters

Homes: waterfront and rural homes near Jefferson Patterson Park

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

Send the form and we will call to confirm a day and time — or skip the form and call (855) 424-6217 right now.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Flashing Repair Process in St. Leonard

1

Diagnose

We separate flashing leaks from crown and masonry leaks first — they look alike from the ceiling.

2

Strip

Failed flashing, tar and caulk are removed down to sound material.

3

Rebuild

New step and counter-flashing go in, woven with the shingles and set into the joint.

4

Water test

The repair is hose-tested so the fix is proven, not hoped for.

Local Chimney Notes

The St. Leonard pattern we see most: Water is the enemy number one here

Between Chesapeake humidity, driving rain and freeze-thaw winters, St. Leonard chimneys fight water on every face: crowns crack at the wash, flashing tires where it meets the roofline, and porous brick drinks storm after storm. The stains show up inside — a ceiling spot two rooms away, a rusted damper, a musty firebox. We trace leaks to their actual entry point before recommending anything, because sealing the wrong joint just moves the water. The camera does not guess, and neither do we — the scan settles what the flue actually holds.

One more thing St. Leonard customers get on every ticket: a named technician, an arrival window we keep, and a written record of the work — the same standard on a cap install as on a full relining.

FAQ

Chimney Flashing Repair Questions in St. Leonard

Do you work with my roofer?
Yes. We handle the chimney side; if shingles beyond the flashing need work we say so plainly and coordinate.
How long does flashing last?
Properly installed metal flashing lasts decades — typically as long as the roof around it.
How fast can a crew reach St. Leonard for chimney Flashing Repair?
St. Leonard is about 45 miles from our Beltsville headquarters — typically a 100-minute drive in normal traffic. Regular appointments are batched into Calvert County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
How long does a sweep visit take?
A standard sweep with inspection at a St. Leonard home runs about 45 to 75 minutes once we are set up. Level 2 camera scans, multiple flues or repair quotes add time. We lay drop cloths, seal the firebox opening and HEPA-vacuum as we go — the room is left as clean as we found it.

Chimney Flashing Repair in Nearby Communities

Route days in St. Leonard rarely end at the town line: the same truck usually continues to Prince Frederick (ZIP 20678), Lusby and Hollywood before heading back to Beltsville — so chimney Flashing Repair in St. Leonard batches with the rest of the Calvert County run, and same-week appointments stay possible here even in October.

More Chimney Services in St. Leonard

See the full chimney service in St. Leonard page for this community's own notes, seasons and reviews.

Chimney Flashing Repair in St. Leonard — Booked in One Call

Photo-documented work and upfront written estimates, about 45 miles from our Beltsville headquarters. Talk to a chimney specialist today.