Est. 2012  ·  Licensed & Insured  ·  MHIC #117311  ·  Owner-Operated
24/7 Emergency Service  ·  (855) 424-6217
📞 (855) 424-6217
Howard County · Maryland

Chimney Chase Cover Installation in Ellicott City

Most chimney problems in Ellicott City start quietly: a cap that rusted through, a crown hairline that drinks rain, creosote glazing a little thicker each year. For Ellicott City homeowners, chimney Chase Cover Installation runs on our regular Howard County route — Ellicott City is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. The housing here — colonials and townhomes in wooded planned villages — shapes what our crews check first and what they carry on the truck.

On a prefabricated chimney, the chase cover is the roof: a metal pan that sheds every drop of rain off the wooden chase. The galvanized covers installed with most prefab systems rust through in years, streaking the siding and soaking the chase. We measure, fabricate and install stainless steel and custom chase covers that end the cycle.

  • Licensed & Insured
  • Photo-Documented
  • ZIPs 21042, 21043
  • 24/7 Emergency
Chimney Chase Cover Installation in Ellicott City, MD — Prefabricated chimney chase with a metal chase cover on a Maryland rooftop
Chimney Chase Cover InstallationNow booking in Ellicott City · Howard County

About Chimney Chase Cover Installation in Ellicott City

A failing chase cover announces itself with rust streaks down the chase, water stains on the ceiling below, and eventually a rotted chase top and framing. Our replacements are measured on the roof — chase dimensions, flue collar height, pitch — and fabricated with a slight crown so water runs off instead of pooling, in stainless that will not rust through like the original galvanized pan. Storm-damaged, leaking and rusted covers are replaced whole; sealing over a rusted-through cover is a patch we will talk you out of.

What's Included

  • Stainless steel chase cover fabrication and installation
  • Custom chase covers for oversized and multi-flue chases
  • Rusted and leaking cover replacement
  • Chase top inspection with every cover job
  • Cover sealing and waterproofing at the collar

Ellicott City at a Glance

County: Howard County

State: Maryland

ZIPs served: 21042, 21043

Distance: about 16 miles from our Beltsville headquarters

Homes: colonials and townhomes in wooded planned villages

Response: 24/7 emergency · same-week appointments typical

Get a Free Estimate

A few details here and dispatch calls back to confirm your slot. Rather talk it through? Call (855) 424-6217.

Please enter your name.
Please enter a valid US phone number.
That email does not look complete.
Please check the address.
Please enter a 5-digit ZIP.
Please pick a day that is not in the past.
Something went wrong sending your request. Please call (855) 424-6217 or use our booking form — we will take it from there.

No spam, no obligation. Your details go only to our scheduling team.

✓ Request received — thank you!We will call you shortly to confirm your appointment. If it is urgent, call us now at (855) 424-6217.
How It Works

Our Chimney Chase Cover Installation Process in Ellicott City

1

Inspect

The cover, chase top and collar are checked for rust-through, pooling and water damage.

2

Measure

Chase dimensions and collar details are measured on the roof for fabrication.

3

Fabricate & fit

The new cover is made with a water-shedding crown and fitted over the chase.

4

Seal & verify

Collars are sealed, fasteners checked, and the finished cover is photographed for your file.

Local Chimney Notes

Local reality: chimneys in Ellicott City: Older masonry needs a gentler hand

The older stacks in Ellicott City were laid with softer brick and lime-rich mortar, and they punish modern shortcuts: hard Portland-heavy repointing traps moisture and spalls the faces, and aggressive grinding scars joints that have survived a century. Our masons match mortar to the original, cut joints by hand where the brick demands it, and stage waterproofing only after repairs cure — the slow way, because it is the way that lasts. Left alone for another season, it rarely stays the same size of problem.

One more thing Ellicott City customers get on every ticket: a named technician, an arrival window we keep, and a written record of the work — the same standard on a cap install as on a full relining.

FAQ

Chimney Chase Cover Installation Questions in Ellicott City

Can a leaking chase cover just be sealed?
Surface rust with sound metal underneath, sometimes. A cover that is rusted through or pooling water needs replacement — sealant over perforation is a short reprieve, and we will show you the photos so you can judge.
Do you make covers for unusual chases?
Yes — custom fabrication is standard work for us, including oversized chases and multi-flue tops.
How fast can a crew reach Ellicott City for chimney Chase Cover Installation?
Ellicott City is about 16 miles from our Beltsville headquarters — typically a 40-minute drive in normal traffic. Regular appointments are batched into Howard County route days several times a week, and emergency calls — chimney fires, smoke in the home, carbon-monoxide alarms — are dispatched 24/7 at (855) 424-6217.
What should we do after a chimney fire?
Call 911 first, always. Then do not light the fireplace again until it has had a Level 2 inspection — chimney fires crack tiles and warp liners invisibly, and the next fire finds those cracks. We prioritize post-fire scans in Ellicott City and document everything for your insurer.

Chimney Chase Cover Installation in Nearby Communities

Route days in Ellicott City rarely end at the town line: the same truck usually continues to Marriottsville (ZIP 21104), Columbia and West Friendship before heading back to Beltsville — so chimney Chase Cover Installation in Ellicott City batches with the rest of the Howard County run, and same-week appointments stay possible here even in October.

More Chimney Services in Ellicott City

See the full chimney service in Ellicott City page for this community's own notes, seasons and reviews.

Chimney Chase Cover Installation in Ellicott City — Booked in One Call

Photo-documented work and upfront written estimates, about 16 miles from our Beltsville headquarters. Talk to a chimney specialist today.